IPhone may not support this accessory common reasons and solutions [introduction]

When charging the iPhone, some fruit powder will encounter the prompt of "may not support this accessory", which leads to the failure of charging. There are many reasons for the problem that the mobile phone does not support this accessory. Today's editor will analyze and give solutions one by one for you.


IPhone may not support this accessory common reasons and solutions Figure 1

1. If you see that the mobile phone does not support this accessory as soon as you connect to the data line, it is generally poor contact. The solution is to check whether there is dirt on the lighting line interface, and then check whether there is dirt on the tail plug of the mobile phone. If there is, you can clean it with cotton swab and alcohol.

2. If you use the front USB of the computer case for charging, the mobile phone does not support this accessory. It is usually caused by insufficient power supply. You can plug it into the USB port at the back of the case, or change the charger for charging.
3. The use of a non original charger may lead to insufficient voltage. The rated output of the original iPhone charger is 1 A, while most cottage chargers are not enough. Try another charger.

4. The damage of the mobile phone charging port leads to unrecognizable problems. Check whether there are traces of water or replacement, and try to charge it with other chargers and data cables.


5. If the above reasons have been checked, there will be "do not support this accessory", then it is very likely that the iPhone's data cable is not original or has not been certified by iPhone MFI.

If the data cable is fake or fake, it will be unable to charge and support this accessory. It is recommended to purchase and use genuine iPhone charger and iPhone MFI certified data cable.