How to choose charging head?

In a word: choose according to the charging requirements of different devices.


I think if you buy a single port charger, such as a spare one, or if you need to replace it when it's broken, you'd better buy more original ones. If you want a third-party charger, usually multi port charger is worth buying. After all, now we have more and more devices. It's more convenient to prepare a multi port charger in advance when you go out. And in the multi port charger, I recommend you can try Gan charger.


Traditional chargers have higher power and larger size. Although the volume of the charger is still within the acceptable range, in the long run, it is inconvenient for us to be too large. The new material gallium nitride can make the volume of the charger very small and the heat dissipation efficiency is faster.

Of course, when we choose the charging head., we should also look at the power and adaptability. A 65W Gan charger is better. If you meet the PD fast charging protocol, you can quickly charge your MacBook, iPad and iPhone at home. At the same time, most of the Gan chargers on the market support PD protocol, and there are some private protocols before different mobile phone manufacturers, so we must see clearly when choosing.

Of course, if you also want to have a gallium nitride charger, you can take a look at the Bess gan2 Pro gallium nitride fast charging charger I am currently using.

It looks long, simple and clean on the whole, giving people a very comfortable feeling. It has the blessing of Gan black technology, which is smaller than the original charger of apple 61W MacBook Pro notebook in hand. When the charger and socket extension cables are inserted on both sides, there is still a lot of space left in the middle, so there is no need to worry about the congestion of the data cable. At the same time, its 90 ° Foldable pin design, let us travel storage more convenient!


In terms of function, the interface configuration part of Beisi adopts the design of 2C + 2U with a total of four interfaces, covering the current mainstream device interfaces. It can not only charge four devices at the same time, but also be generally applicable to most devices. Of course, its charging speed is not slow at all. The single port of type-C1 / type-c2 is 100W, and even my notebook can be used. In addition, I'm going to show you which fast charging protocols the Bess Gan charger supports: type-C1 / type-c2; PD3.0/PD2.0PPS/QC4+ USB1/USB2 Qc3.0/qc2.0/scp, FCP / AFC, apple2.4/bc1.2/pe +, it can be said that most of them are supported, and you can rest assured to use them.

In terms of safety, Beth also adopts effective measures. On the one hand, BCT technology is used to stimulate the infrared resonance effect of the surface of the heat dissipation by nanotechnology, and accelerate the heat emission from the surface, so as to effectively improve the heat dissipation efficiency. On the other hand, the intelligent regulation technology of Beisi, which is dynamic and independent power distribution, has no big problem even if the four ports are filled together.

These are some of my little shares! In the purchase of the charging head., mainly depends on how you think, hope that everyone can find the appropriate charging head..