Adol (ADU) is a young and energetic brand of ASUS. Its main products include notebook, digital accessories, mobile power supply, intelligent products, etc. Recently, ASUS adol launched its first Gan charger, which is equipped with three popular 2c1a inter
Adol (ADU) is a young and energetic brand of ASUS. Its main products include notebook, digital accessories, mobile power supply, intelligent products, etc. Recently, ASUS adol launched its first Gan charger, which is equipped with three popular 2c1a interfaces. The two C ports have the same single port output performance. The maximum output is 65W, which supports blind insertion; In addition, the maximum output of port a is 30W, and the compatibility protocol is comprehensive.
For this charger, not long ago, the charging head network has conducted a detailed evaluation of it. Today, I will continue to share the disassembly of the charger with you to see how the internal design materials are.
1、 ASUS adol 65W Gan charger appearance packaging box adopts orange white color, with product name and appearance diagram on the front, and adol brand logo on the lower right corner and side.
The back of the charger is printed with the charger parameter information and is pasted with anti-counterfeiting label.
Open the packing box, cover the charger with a dustproof plastic bag and use a plastic tray for protection.
ASUS adol 65W Gan charger adopts long column shape design. The surface of white body shell is matte. The transition between all sides of the waist is smooth, and the transition between the input and output edges is relatively smooth. It's easy to use. In the lower left corner of the side is the adol logo. Adol adapter and 65W are printed on the bottom of the adjacent sides, indicating the maximum power of the charger, which can charge mobile phones, tablets, laptops and other devices.
The input end is equipped with foldable GB pins, and the double wing support design is added on both sides of the fuselage shell for more stable use.
In addition, the charger parameters are marked on the input housing
Input: 100-240V ~ 50 / 60Hz 1.5A
Single port output:
Dual port output:
(usb-c2 / a output: 5v3a, 9v2a, 12v1.5a)
Three port output:
Producer: ASUS computer (Shanghai) Co., Ltd
The product has passed 3C certification. The output top is equipped with 2c1a three output interfaces, two usb-c ports, the black rubber core does not expose copper, and the usb-a port is orange rubber core.
The usb-a interface has special contacts for protocol identification support.
The measured length of charger body is 65.98mm by vernier caliper.
The width is 41.02mm.
The thickness of the charger is 28.96mm, and the volume of the charger is 78.38cm ³， So the power density is about 0.83w/cm ³。 Compared with apple 61W charger, the volume advantage is obvious. The body thickness is a little larger than the diameter of a dollar coin. The charger has a net weight of about 112G. The usb-a port output protocol is detected by using chargerlab power-z kt002. It shows that apple 2.4a, Samsung 5v2a, DCP protocol, qc2.0/3.0, AFC, FCP, SCP, MTK pe+2.0 are supported.
The output protocol of usb-c1 port is detected by kt002. It shows that apple 2.4a, Samsung 5v2a and DCP protocols are supported, as well as qc2.0/3.0, AFC, FCP, SCP, MTK pe+2.0, pd3.0 and PPS.
In addition, the PDO message shows that usb-c1 port has five fixed voltage gears, namely 5v3a, 9v3a, 12v3a, 15v3a, 20v3.25a, and a group of PPS voltage gears 3.3-11v5a. Kt002 test shows that usb-c2 port output protocol is consistent with C1 port, and also supports apple 2.4a, Samsung 5v2a, DCP, qc2.0/3.0, AFC, FCP, SCP, MTK pe+2.0, pd3.0 and PPS.
Summary of dismantling charging head net
The Acol 2c1a 65W Gan charger is designed with long column shape, matte treatment of the fuselage shell, and foldable pin at the input end, which is convenient to carry. Charger supports mainstream fast charging protocols such as QC, AFC, FCP, SCP, pe2.0, PD and PPS, and has voltage ranges of 5v3a, 9v3a, 12v3a, 15v3a, 20v3.25a and 3.3-11v5a, and has good overall compatibility. It is easy to use at home, and can meet the fast charging needs of mobile phones, tablets and laptops.
The charging head network is understood through disassembly that the internal circuit of this charger adopts switch power supply and two-way DC-DC step-down output architecture. The switching power part is composed of Ansenmei ncp1342, nano nv6115 Gan power chip, MPs mp6908a and power megger synchronous rectifier MOS. Usb-c1 and the other 1a1c are controlled by Zhirong sw3516 and sw3510 for secondary step-down and protocol identification. In addition, the charger has a clear layout in front, middle and rear, and the internal pouring type glue injection improves the stability and heat dissipation performance of the product.